May 09, 2019 · There's no way. you can select an option that says “ Advertise routers IP in addition to user-name specified DNS " which is a setting available under the IPv6 settings. I don't know if this is ...
I feel like all my wireless clients using the same LAN / same IP range as my wired clients. Is this because wireless client leases are caching the old DNS ( ...
09.05.2019 · There's no way. you can select an option that says “ Advertise routers IP in addition to user-name specified DNS " which is a setting available under the IPv6 settings. I …
I.E. under LAN | DHCP Server that reads " Advertise router's IP in addition to user-specified DNS "Assuming you have that turned off and have listed PiHole as the DNS server slots above it, please confirm. It really sounds like the router isn't providing the pihole DNS as the internal DNS servers to the clients.
Aug 08, 2020 · Make sure the "Advertise router’s IP in addition to user-specified DNS" setting on the router is switched off. [fixed] Pi-Hole newbie with DNS issues Help Asus routers are known to push their own IP for DNS via DHCP: If want to be sure, install nmap on Pi-hole: sudo apt install nmap And post results for below one (might want to redact some ...
Some Asus routers advertise their own IP as a DNS server along with whatever you set for the internal network. I run Asus-Merlin, so setting available to me maybe slightly different, but I have a way to unset that. I.E. under LAN | DHCP Server that reads " Advertise router's IP in addition to user-specified DNS "
Once I disabled "Advertise router's IP in addition to user-specified DNS" in the Merlin firmware it appears all traffic now goes to the Pi-Hole(s) rather than sneaking through by using the Asus IP for a DNS. Really wish the stock Asus firmware had a second DNS field and the option to disable using the router as a DNS address.
It assumes that the router is also the DNS server for the LAN, which is done by setting ‘Advertise router’s IP in addition to user-specified DNS’ under LAN-> DHCP Settings to ‘Yes’. Leaving DNS Server 1 and 2 empty will broadcast only the router’s IP for name resolution. SSH access can be enabled under Administration-> System.
... unless you've kept the option to Advertise the router's IP in addition to your user-specified DNS, but that would also undercut pihole adblocking (some ...
Refer to the screenshot below; your subnet may vary from mine, and your Pi address will definitely vary from mine, but you want DNS Server 1 to be your Pi-hole's IP address, and DNS Server 2 should remain blank. "Advertise router's IP in addition to user-specified DNS" should be set to NO. Click Apply. In your router's admin page, go to LAN ...
Pihole->Settings->DNS->Conditional Forwarding (bottom of page) and put in your router's details. Note: This also requires setting your router settings to: Advertise router's IP in addition to user-specified DNS: No. DNS server 1: Your Pihole address. 1.
Search within r/pihole. r/pihole. Log In Sign Up. User account menu. ... I have a RT-AC68 and even though it gives out my pi's IP for DNS half my devices use the router anyway. ... (probably stock ASUS too) has an option to advertise the router's IP in addition to the specified DNS server. You have to turn that off.
26.05.2015 · If you select Yes for “Advertise routers IP in addition to user specified DNS”, then the routers address will be appended to the DNS address list given to the clients when they lease an IP address. I said “appended” meaning it will be LAST!
Once I disabled "Advertise router's IP in addition to user-specified DNS" in the Merlin firmware it appears all traffic now goes to the Pi-Hole(s) rather than sneaking through by using the Asus IP for a DNS. Really wish the stock Asus firmware had a second DNS field and the option to disable using the router as a DNS address.
Yep, running a 68 with Merlin. I use my PiHole for the primary DNS server and have the secondary blank. I also enable "Advertise router's IP in addition to user-specified DNS" (forwards to 8.8.8.8) to avoid outages if I break the Pi or run maintenance.
If I did one or the other, I believe I was getting leaks, with my ISP DNS showing on leak tests. The TP-Link won't allow me to set the manual DNS setting to an IP on the same subnet as the gateway. But if I set the DHCP DNS to my Pi-hole, it appears to be functional. I just don't understand the difference. Thanks in advance.
So I just recently set up pihole. I have an ASUS router (Plus a couple AiMesh routers), all using Asuswrt-Merlin. I have set the Pi IP as DNS under LAN->DHCP server and turned off "Advertise router's IP in addition to user-specified DNS". I have IPv6 Enabled on the router and put the pihole's IPv6 IP as the specified DNS.
Regardless of which method you choose, you should ensure that you set the Advertise router's IP in addition to user-specified DNS to No in the DNS and WINS ...