srch

Centos 7 - ping 8.8.8.8 (connect: Network is unreachable). I think I have a routing problem. I have set up a CentOS VM, it is connected to my network and I ...

Centos 7 - ping 8.8.8.8 (connect: Network is unreachable)Helpful? Please support me on Patreon: https ...

I currently have CentOS 7 minimal (no gui) running in Hyper-V which was ... [root@localhost ~]# ping 8.8.8.8 connect: Network is unreachable.

i have installed centos 8 in vmaware 15 and curent network setting in vmware ... From 192.168.1.10 icmp_seq=1 Destination Host Unreachable

28.12.2012 · my os is Centos 6.3 with 2.6.32-279.19.1.el6.x86_64 linux kernel. I've config it to enable ipv6, but when ping , network is unreachable. please help.

That effectively means the only valid addresses within the subnet are the host and the gateway. It is also on a private non-routing address ...

Now when I try to ping 8.8.8.8 on the server through proxmox's console I get 'Network is unreachable', and I'm unable to connect to the ...

20.06.2017 · The only time you would get a network is unreachable is if you tried to create a route that was not accessible directly from your subnet. So with your interface having 192.168.250.98/24 ip ro add default via 192.168.250.1 <- works ip ro add 8.8.8.8 via 192.168.250.250 <- works ip ro add 8.8.8.9 via 192.168.251.1 <- network is unreachable

Based on the errors, you need to update the files to look like this: /etc/sysconfig/network-scripts/ifcfg-enp0s3: TYPE="Ethernet" BOOTPROTO="static" ...

Right-click the CentOS virtual machine, click Settings… menu item in the popup menu list. Click the Network tab in the top area, check Enable Network Adapter checkbox, then select Bridged Adapter in the Attached to drop-down list.

Based on the errors, you need to update the files to look like this: /etc/sysconfig/network-scripts/ifcfg-enp0s3 : TYPE="Ethernet" BOOTPROTO="static" ...

I followed the instructions here and then here to disable the network manager, I installed cPanel and got it working fine. I added extra IP addresses then restarted the server. Now when I try to ping 8.8.8.8 on the server through proxmox's console I get 'Network is unreachable', and I'm unable to connect to the server remotely. My ifcfg-eth0 file:

Networking – Centos 7 – ping 8.8.8.8 (connect: Network is unreachable). centoscentos-7networking. I think I have a routing problem. I have set up a CentOS ...

You have PREFIX="32" , which is the same as NETMASK=255.255.255.255 . Get rid of that, and set a netmask that will allow you to reach your gateway address.

15.04.2015 · I have set up a CentOS VM, it is connected to my network and I can ping other machines. I cannot however ping anything outside of my network. [root@localhost ~]# ping 8.8.8.8 connect: Network is unreachable I also set up port forwarding on my router to forward SSH on port 22 to this machine and I cannot access it outside of my network (using ...