19.03.2018 · I'm trying to figure out how to disable (turn-off) the WiFi radio in build 31277? I can't seen to find anything in Google or the DDWRT forums. The only thing that I find are instructions to go into 'Wireless', then 'Basic Settings', and the under 'Wireless Mode' and then look for 'Disable'. Unfortunately there is no disable option in my build.
How it works in DD-WRT: To configure your radio channels in the WebGUI you browse to the "Basic Settings" under the "Wireless" page on your DD-WRT router. If you have dual band router (ie. Two Radios inside the router) you will see two sections for configurations listed in this page with the headings as "wl0" for the 2.4GHz radio and "wl1" for the 5GHz radio.
20.01.2022 · Go to Wireless > Basic Settings page in DD-WRT settings Set Wireless Network Mode to Disabled for any band that you want to disable. Click Apply Settings Please note, older versions of DD-WRT or certain router models may not support this feature. Instead, users can turn off Wi-Fi bands via DD-WRT Wireless settings, as explained below.
DD-Wrt also has an option to disable the SSID from being broadcast in beacon frames to reduce security issues. Supported rates. Each beacon carries information that describes the rates that the particular wireless LAN supports. For example, a beacon may indicate that only 1, 2, and 5.5Mbps data rates are available.
How To Disable Wireless Network Broadcasting on a DD-WRT Router Using A Router, ... DD-WRT VLAN Multicast Configuration Page - Multiple Subnets Computer ...