#### WAN configuration config interface wan option ifname "eth0.1" option proto dhcp option hwaddr "xx:xx:xx:xx:xx:xx" I hope, I inserted to code at the right position, I'm not 100% sure about that. Attachments (1)
20.05.2009 · 2009. május 18., hétfő # OpenWrt - How to change WAN Mac address Because the WAN part is the last one in the config file: #### WAN configuration config interface wan option ifname "eth0.1" option proto dhcp Just append a line like this: echo "option macaddr XX:XX:XX:XX:XX:XX" >> /etc/config/network sync Címkék: Linux, OpenWrt
I added a secondary wan-interface (wan2, dhcp client) and under physical settings connected it with the wifi-client. It works fine, the wifi-client connects to the network and the wan2-interface receivies an IP. But when I try to override the mac address of the wan2-interface, the changed mac address won't appear in LuCi.
New comments cannot be posted and votes cannot be cast Sort by level 1 drraug · 2y It's answered in the Section 7.9 of the Bill's manual. Basically, you go to Network -> Interfaces -> WAN -> Advanced Settings and use "Override MAC address" field. The MAC you chose should not be the same as the MAC for LAN or wireless ports. 1 level 1
08.10.2019 · There are two options to specify the label MAC address in OpenWrt: label-mac-device DTS file We can refer to the device bearing the label MAC address in DTS. For that purpose, one needs to reference the node with an alias, e.g. aliases { label-mac-device = &wifi0; }
27.06.2016 · You can take a look on the calibration data in the "art" partition.If your MAC address is stored in it then you can change it. root@OpenWrt:/# cat /proc/mtd dev: size erasesize name mtd0: 00030000 00010000 "u-boot" mtd1: 00fc0000 00010000 "firmware" mtd2: 00120000 00010000 "kernel" mtd3: 00ea0000 00010000 "rootfs" mtd4: 00c60000 00010000 "rootfs_data" …
14.04.2019 · WAN MAC address randomizer for OpenWRT/LEDE Purpose This script generates a random MAC address for the WAN interface on an OpenWRT/LEDE router. It is implemented as an init script, so it is able to randomize the MAC address every time the router restarts. Dependencies Nothing special. It should work on a base OpenWRT/LEDE system. Usage
19.01.2015 · Fix MAC Address Clone in OpenWRT Date Mon 19 January 2015 Category linux Tags macaddr / openwrt / hwaddr / clone / overriding. I used to be able to change the MAC address of WAN interface by specifying macaddr option in /etc/config/network. However, due to unknown reason , this no ...
16.05.2021 · Is it possible in OpenWrt to change the MAC address that is presented to the wifi network it connects to in Client mode? Ideally I would like to change the MAC address to one from a list either within the config (maybe randomly when I reboot router or restart the radio) or to have a file of say a hundred MAC addresses in a text file that it works its way through. The reason I …
26.02.2021 · Related posts: ZyXEL USG210 – change local address to big mask /22 Vyatta – DHCP client, IP address, MAC address, Static routing, DNS client OpenWrt – IPv6 конфигуриран с LuCI 6in4 tunnel от Tunnel Broker на Hurricane Electric Ubuntu small router configuration in one file. Debian – VLAN Cisco QOS per ip address DROP Facebook […]