Replacing Devices in a Storage Pool ... There are two reasons why you may want or need to replace a device. You may want to replace a device with a larger device, ...
14.02.2021 · 5.-. Replace the ‘old’ remaining disk/s (optional). So far we’ve changed the failed disk (or simply replaced it with a newer one), added a new disk, partitioned and formatted it for ZFS use, attached it to the pool, checked the resilver process …
Replacing a Device in a ZFS Storage Pool After you have determined that a device can be replaced, use the zpool replace command to replace the device. If you are replacing the damaged device with different device, use syntax similar to the …
20.05.2020 · Now replace the disk in zpool: # zpool replace zroot 12385660660938982245 /dev/da4p4 Make sure to wait until resilver is done before rebooting. If you boot from pool 'zroot', you may need to update boot code on newly attached disk '/dev/da4p4'.
Shutdown the server. · Inspect each disk drive until you locate the faulty one by its serial number. · Unplug and remove the faulty disk. · Put the ...
zpool replace pool_name device_name The first one takes a device_name drive offline from a pool_name pool, you then replace the drive with a new one and tell Zfs to replace the drive device_name in in the pool pool_name. device_name and pool_name are the names of your drive and pool shown in zpool status. Share Improve this answer
Take offline the disk (c1t3d0)to be replaced. · Use the cfgadm command to identify the disk (c1t3d0) to be unconfigured and unconfigure it. · Physically replace ...