Now, the answer isn't disable IPv6 on windows and android and X, ... dnsmasq to work on ERL with any OS regardless of IPv4, or IPv6 to resolve short or FQDN ...
Set up dnsmasq to handle router advertisement and dhcpv6 along side the regular dhcp for IPv4 And then covering some basics There are multiple ways to delegate and obtain IPv6-prefixes, the most common way is that your ISP delegate a prefix to you using slaac or dhcpv6.
07.07.2011 · If you want to disable dnsmasq offered DNS and to use your external DNS server, you can do it using port option/flag. Specify port as “zero” : -p, –port= Listen on instead of the standard DNS port (53). Setting this to zero completely disables DNS function, leav‐. ing only DHCP and/or TFTP.
07.10.2019 · Dnsmasq configuration for DHCPv4 and stateful DHCPv6 In some situations, you want to run your DHCP server for IPv4 and IPv6 to get full control of your network. For IPv4, it’s straight forward but for IPv6, you have to know some differences. With IPv6, the clients don’t need a DHCP server to retrieve an IP address.
The dnsmasq DHCP server supports static address assignments and multiple ... To give both IPv4 and IPv6 addresses for a domain, use repeated --address flags ...
I've tried a few things which haven't worked: turning off DHCPv6, disabling the DNS caching of dnsmasq, setting dnsmasq's DHCP server to provide a static ...
22.01.2019 · Unlike normal DNS and DHCP, DNSMASQ is a very lightway DNS+DHCP server which was originally developed for small networks. Having said that it will actually work nicely for this particular task and provide name resolution for smart devices that do not support DHCPv6. Configuration This setup is very particular.
Dnsmasq DNS proxy and DHCP server. Contribute to aa65535/dnsmasq ... --address (and --server) work with IPv6 addresses too. ... disable DHCP and TFTP on it.
given use cases: Dnsmasq. The Dnsmasq project combines DHCP and DNS in a single daemon and supports both IPv4 and IPv6. Dnsmasq also supports portions of IPv6 autoconfiguration, including router advertisement (RA). The feature that places Dnsmasq in the most appealing position is that its DHCP and DNS
05.09.2014 · DHCPv6 and RA with dnsmasq. Dnsmasq has been a good companion of small network administrators for years. It proved to be a swiss knife for the IPv4 networks, providing DHCP and DNS services…. The IPv6 is coming, whether you like it or not…. And dnsmasq can help here too, by providing both DHCPv6 and RA services.
24.03.2018 · The `/etc/dnsmasq.conf` file may have lines that enable DHCP service of dnsmasq. By default, the DHCP is disabled in dnsmasq (check one example dnsmasq.conf file ). To disable DHCP service in dnsmasq, in `/etc/dnsmasq.conf`, remove or disable the lines starting with “dhcp” and then restart the dnsmasq service. Read more:
27.09.2021 · This. # is needed for networks we reach the dnsmasq DHCP server via a relay. # agent. If you don't know what a DHCP relay agent is, you probably. # don't need to worry about this. #dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h. # This is an example of a DHCP range which sets a tag, so that.
27.05.2021 · Posted: Tue May 25, 2021 4:29 Post subject: [SOLVED}Disabling Dnsmasq from allocating IPv6 LAN addresses: I recently upgraded an R7000 from DD-WRT v3.0-r41811 std (12/28/19) to DD-WRT v3.0-r46446 std (04/24/21). The router is running fine but I noticed in Status, LAN that the Dnsmasq DHCP server is giving each LAN client an IPv4 address (which I …