dnsmasq is a lightweight DNS, TFTP and DHCP server. It is intended to provide coupled DNS and DHCP service to a LAN. Dnsmasq accepts DNS queries and either ...
The DHCP server is activated by specifying a DHCP IP address range: dhcp-range=192.168.0.101,192.168.0.150,255.255.255.0,6h. This example instructs Dnsmasq to offer IP addresses between 192.168.0.101 and 192.168.0.150 in the 255.255.255.0 subnet. Issued IPs will have a lease lifetime of six hours, after which clients will need to request a ...
Dec 15, 2021 · Dnsmasq is now ready to operate in DCHP-only mode. Configuring Your DHCP Server The DHCP server is activated by specifying a DHCP IP address range: dhcp-range=192.168.0.101,192.168.0.150,255.255.255.0,6h This example instructs Dnsmasq to offer IP addresses between 192.168.0.101 and 192.168.0.150 in the 255.255.255.0 subnet.
# so don't use it if you use eg Kerberos, SIP, XMMP or Google-talk. # This option only affects forwarding, SRV records originating for. # dnsmasq (via srv-host= ...
This. # is needed for networks we reach the dnsmasq DHCP server via a relay. # agent. If you don't know what a DHCP relay agent is, you probably. # don't need to worry about this. #dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h. # This is an example of a DHCP range which sets a tag, so that. # some DHCP options may be set only for this ...
Dec 29, 2013 · dhcp-option=option:ntp-server,192.168.0.5 When a host is requesting an IP address via DHCP also tell it the NTP to use. In the file /etc/dnsmasq_static_hosts.conf you can add a list of local machines with static IP addresses in the same format as the hosts file. It is also an easy way of creating aliases or CNAME records.
Sep 27, 2021 · This. # is needed for networks we reach the dnsmasq DHCP server via a relay. # agent. If you don't know what a DHCP relay agent is, you probably. # don't need to worry about this. #dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h. # This is an example of a DHCP range which sets a tag, so that.
29.12.2013 · dhcp-option=option:ntp-server,192.168.0.5 When a host is requesting an IP address via DHCP also tell it the NTP to use. In the file /etc/dnsmasq_static_hosts.conf you can add a list of local machines with static IP addresses in the same format as the hosts file. It is also an easy way of creating aliases or CNAME records.
27.09.2021 · This. # is needed for networks we reach the dnsmasq DHCP server via a relay. # agent. If you don't know what a DHCP relay agent is, you probably. # don't need to worry about this. #dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h. # This is an example of a DHCP range which sets a tag, so that.
/etc/dnsmasq.conf (0644): server dnsmasq configuration # # Configuration file ... The example below send any host in doubleclick.net to a local # webserver.
#dhcp-range=192.168.0.50,192.168.0.150,12h # This is an example of a DHCP range where the netmask is given. This # is needed for networks we reach the dnsmasq DHCP server via a relay # agent. If you don't know what a DHCP relay agent is, you probably # don't need to worry about this. #dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h
30.09.2020 · $ sudo dnsmasq --test dnsmasq: syntax check OK. Now edit the hosts file, which can contain both statically- and dynamically-allocated hosts. Static addresses should lie outside the DHCP range you specified earlier. Hosts using DHCP but which need a fixed address should be entered here with an address within the DHCP range. sudo vi /etc/hosts
15.02.2018 · Run dnsmasq --help dhcp to see all the IPv4 options. dnsmasq --help dhcp6 lists the IPv6 options. (See man 5 dhcp-options for more information on options.) You may also use the option names instead of the numbers, like this example for your NTP server: dhcp-option=eth,option:ntp-server,192.168.10.5.