srch

OpenWRT dnsmasq-full配置https://www.itgeeker.net/openwrt-dnsmasq-full-install-and-config/

03.05.2016 · 安装过程 root@OpenWrt:/tmp# opkg remove dnsmasq Removing package dnsmasq from root... Not deleting modified conffile /etc/dnsmasq.conf. Not deleting modified conffile /etc/config/dhcp. root@OpenWrt:/tmp# opkg install dnsmasq-full Installing ...

14.02.2021 · dnsmasq-full Version: 2.80-1.4 Description: It is intended to provide coupled DNS and DHCP service to a LAN.\\ \\ This is a fully configurable variant with DHCPv4, DHCPv6, DNSSEC, Authoritative DNS\\ and IPset, Conntrack support & NO_ID enabled by default.\\ \\ Installed size: 153kB Dependencies:

17.02.2021 · Dnsmasq is a lightweight, easy to configure DNS-forwarder and DHCP-server.It is designed to provide DNS and, optionally, DHCP, to a small network.It can serve the names of local machines which are not in the global DNS.The DHCP-server integrates with the DNS server and allows machines with DHCP-allocated addresses to appear in the DNS with names configured …

Feb 14, 2021 · dnsmasq-full Version: 2.80-1.4 Description: It is intended to provide coupled DNS and DHCP service to a LAN.\\ \\ This is a fully configurable variant with DHCPv4, DHCPv6, DNSSEC, Authoritative DNS\\ and IPset, Conntrack support & NO_ID enabled by default.\\ \\ Installed size: 153kB Dependencies:

08.07.2020 · dnsmasq-full安装. openwrt的默认dnsmasq并不支持ipset，需要安装dnsmasq-full版本。. ipset是为了支持对域名的转发代理，而chinadns是对ip进行转发代理。. 所以如果你选择域名匹配的方式走代理，则需要安装dnsmasq-full版本。. 这里就有了一个问题，当卸载dnsmasq之 …

Feb 18, 2020 · I've previously used dnsmasq-full and some extra lines in dnsmasq.conf to get this working. On 18.x and probably before I did this to install dnsmasq-full: ssh root@192.168.0.1 opkg update opkg remove dnsmasq opkg install dnsmasq-full Then presumably rebooted. On 19.07.1 when I remove dnsmasq I cant then download dnsmasq-full:

Collected errors: * check_data_file_clashes: Package dnsmasq wants to install file /build/openwrt-imagebuilder/build_dir/target-mips_24kc_musl/ ...

Feb 17, 2021 · Dnsmasq DHCP server Dnsmasq is a lightweight, easy to configure DNS-forwarder and DHCP-server. It is designed to provide DNS and, optionally, DHCP, to a small network. It can serve the names of local machines which are not in the global DNS. The DHCP-server integrates with the

16.12.2021 · DNS and DHCP examples See also: DNS and DHCP configuration, DNS encryption, DNS hijacking Introduction This how-to provides most common dnsmasq and odhcpd tuning scenarios adapted for OpenWrt. Instructions Static leases LuCI -> DHCP and DNS -> Static Leases Add a fixed IPv4 address 192.168.1.22 and name

opkg install dnsmasq-full --download-only && opkg remove dnsmasq && opkg install dnsmasq-full --cache . && rm *.ipk Maybe the readme should be edited as this is a lot of hassle if it goes wrong. A workaround if things have already gone wrong I found is this:

This is a fully configurable variant with DHCPv4, DHCPv6, DNSSEC, Authoritative DNS and IPset, Conntrack support & NO_ID enabled by default.

FS#1765 - dnsmasq-full fails to listen on dhcp socket after reboot. When I restart my router, dnsmasq comes up and works for IPv6, but fails to serve out dhcp for ipv4. Supply the following if possible: - Device problem occurs on. Ubiquiti Edgerouter Lite. - Software versions of OpenWrt/LEDE release, packages, etc.

OpenWRT + dnsmasq-full + dnssec. Since this afternoon i have the problem that dns resolution doesn't work on my openwrt (19.07.-rc1) router.

【Network】Shadowsocks + OpenWRT + dnsmasq-full + ipset + gfwList 实现路由器（小米路由器mini）自动翻墙. Posted by 西维蜀黍on 2019-01-30, ...

19.01.2021 · Security Advisory 2021-01-19-1 - dnsmasq multiple vulnerabilities (CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687) DESCRIPTION Dnsmasq has two sets of vulnerabilities, one set of memory corruption issues handling DNSSEC and a second set of issues validating

Name: dnsmasq-full; Version: 2.85-8; Description: It is intended to provide coupled DNS and DHCP service to a LAN.

65 rader · 16.12.2021 · Tells dnsmasq never to forward queries for plain names, without dots or …

removing dnsmasq before installing dnsmasq-full will make it impossible to download packages. Also the dns-resolver failed to work on my router afterwards. This line works for me: opkg install dnsmasq-full --download-only && opkg remove dnsmasq && opkg install dnsmasq-full - …

29.02.2020 · I have a local domain name set up for machines and services on the lan. I've previously used dnsmasq-full and some extra lines in dnsmasq.conf to get this working. On 18.x and probably before I did this to install dnsmasq-full: ssh root@192.168.0.1 opkg update opkg remove dnsmasq opkg install dnsmasq-full Then presumably rebooted. On 19.07.1 when I …

removing dnsmasq before installing dnsmasq-full will make it impossible to download packages. Also the dns-resolver failed to work on my router afterwards.

16.03.2020 · 注意，我下面的代码没有写错，第一条是下载ipk文件到本地，第二条dnsmasq-full安装一定会失败，但目的是让系统自动安装所需要的依赖。 opkg download dnsmasq-full opkg install dnsmasq-full opkg remove dnsmasq opkg install dnsmasq-full_2.80-15_x86_64.ipk rm dnsmasq-full_2.80-15_x86_64.ipk