srch

dnsmasq is a lightweight and simple program which enables issuing DHCP addresses on your network and registering the hostname & IP address in ...

To enable the DHCP server, open /etc/dnsmasq.conf and search for “dhcp” to find any relevant options and comments. The DHCP options are gathered ...

sudo service dnsmasq restart. Once done, any device your plug into your network will get an IP address in the defined range. Your Raspberry Pi will act as a DHCP server (which was the goal of this tutorial) but also as a DNS forwarder. So, any host added in the /etc/hosts file can be use on other devices on your network.

Dnsmasq will discard world # requests to them, but the paranoid might like to close them and let the # kernel handle them: bind-interfaces # Dynamic range of IPs to make available to LAN pc dhcp-range=192.168.111.50,192.168.111.100,12h # If you’d like to have dnsmasq assign static IPs, bind the LAN computer's # NIC MAC address: dhcp-host=aa ...

08.08.2017 · Exporting "conf_file=dnsmasq.conf" in the NetworkManager startup script didn't work. Here's the two relevant lines from syslog: Oct 6 11:19:44 localhost dnsmasq-dhcp[13278]: DHCP, IP range 192.168.101.50 -- 192.168.101.150, lease time 12h Oct 6 11:19:44 localhost dnsmasq-dhcp[13278]: DHCP, IP range 10.42.0.10 -- 10.42.0.254, lease time 1h Apparently, the …

15.02.2018 · dhcp-range=192.168.10.10,192.168.10.50,12h defines a range of 40 available address leases, with a lease time of 12 hours. This range must not …

dhcp-range=192.168.10.10,192.168.10.50,12h defines a range of 40 available address leases, with a lease time of 12 hours. This range must not ...

This 160 # is needed for networks we reach the dnsmasq DHCP server via a relay 161 # agent. If you don't know what a DHCP relay agent is, ...

The dnsmasq DHCP server supports static address assignments and multiple networks. It automatically sends a sensible default set of DHCP options, and can be ...

30.09.2020 · $ sudo dnsmasq --test dnsmasq: syntax check OK. Now edit the hosts file, which can contain both statically- and dynamically-allocated hosts. Static addresses should lie outside the DHCP range you specified earlier. Hosts using DHCP but which need a fixed address should be entered here with an address within the DHCP range. sudo vi /etc/hosts

dnsmasq provides a DNS server, a DHCP server with support for DHCPv6 and PXE, and a TFTP server. It is designed to be lightweight and have a ...

Dnsmasq is a lightweight, easy to configure, DNS forwarder and DHCP server. It is designed to provide DNS and optionally, DHCP, to a small network. It can serve the names of local machines which are not in the global DNS. The DHCP server integrates with the DNS server and allows machines with DHCP-allocated addresses to appear in the DNS with ...

The dnsmasq DHCP server supports static address assignments and multiple networks. It automatically sends a sensible default set of DHCP ...

06.06.2020 · Back in 2007, Bernat explained how to set up our own domain name using ISC BIND and ISC DHCP.You can’t go wrong with those servers but maybe you prefer something more straightforward. I present here a simpler alternative built on top of dnsmasq which is an integrated DNS and DHCP. What we are going to do is to configure our a forwarding DNS (so it …

The optional set: sets an alphanumeric label which marks this network so that dhcp options may be specified on a per-network basis. When it is ...

16.03.2020 · I'm trying to enable multiple DHCP IP ranges on dnsmasq where IP assignments would be based on clients FQDNs (or domain name parts). I found that dnsmasq has options like dhcp-match which can be combined with dhcp-range by tags. Unfortunately, i'm not able to get it working and i don't know if dnsmasq cannot do that or if i'm configuring it ...

29.12.2013 · dhcp-option=option:ntp-server,192.168.0.5 When a host is requesting an IP address via DHCP also tell it the NTP to use. In the file /etc/dnsmasq_static_hosts.conf you can add a list of local machines with static IP addresses in the same format as the hosts file. It is also an easy way of creating aliases or CNAME records.

Dnsmasq is a lightweight, easy to configure, DNS forwarder and DHCP server. It is designed to provide DNS and optionally, DHCP, to a ...

I said proper configuration, because we need to ask DHCP server to play nicely with other servers servicing the same pool of hosts. When ...