srch

It's good that you're using DNSMasq. You can configure what you want in the Services (> Services) tab, in the DNSMasq > Additional DNSMasq Options box, ...

Related DHCP and DNSMasq settings. LAN Domain has string " mydomain "; Used Domain is "LAN & WLAN"; DNSMasq is Enable; Local DNS is Enable ...

If you are using DNSMasq for DNS and also use a VPN client on your Windows PC's (say to connect to work), you may find that your DNS name resolution through your VPN tunnel may stop working. This is because the DNS requests are being sent to DD-WRT instead of the VPN tunnel, due to the binding order of the remote access connection.

DD-WRT supports using DNSMasqas a local DNS server. DNSMasq can intelligently add DHCP leases to its DNS database, providing local name lookups for any DHCP client, staticor dynamic. udhcpd, the former DHCP server (daemon), is not to be confused with udhcpc, the DHCP client.

Open a browser and point it to your router running DD-WRT. Authenticate with the admin ID and password when needed. · Go to the “Setup > Basic ...

So far I've learned of 3 ways to configure the DD-WRT, so that it will perform DNS for your local network. I don't claim to know which way is preferred by the developer(s) of the DD-WRT. Warning : Whatever method you use, you might not "see" the expected results on your computer until you reboot the computer or restart the network interfaces.

I don't want to use Dnsmasq because I don't want to be managing DNS records on my router. Is this possible? Here's a screenshot of the settings:.

[edit] Using Web-Admin · Go to Administration->Services. Make sure that. LAN Domain = <chosen LAN domain>; DNSMasq = Enabled; Local DNS = Enabled ...

Switch off the local DHCP server as well as DNSMasq. Find the relevant settings on the DD-WRT console under the Setup > Basic Setup tab. Select ...

If you want to turn on DNSMasq in DD-WRT, go to the Setup –> Basic Settings Tab. ... Go down to the bottom and click “Apply Settings.” There might ...

25.05.2011 · There’s a good chance you haven’t noticed this setting in DD-WRT because it’s not something most people would ever think to use. Plus DNSMasq can be found in two different areas within DD-WRT since it can be used for both DHCP assignmentsas well as internal/local DNS management. What I will be focusing on is the local DNS aspect.

Unfortunately, dnsmasq configuration is giving me nothing but headaches. Here's what I want: DNS queries from the LAN/WLAN for hosts on the LAN/WLAN should be ...

04.12.2010 · DNSMasq/Local DNS Setup .. Need Advice. DD-WRT Forum Forum Index-> Broadcom SoC based Hardware: View previous topic:: View next topic

Since changeset 39350, udhcpd has been removed and DNSMasq is the only DHCP server in dd-wrt.. DD-WRT supports using DNSMasq as a local DNS server.DNSMasq can intelligently add DHCP leases to its DNS database, providing local name lookups for any DHCP client, static or dynamic.

Mar 01, 2018 · DNSmasq as local DNS. 1. No name router from my internet provider with internet cable in it, default firmware. (DHCP enabled 192.168.1.1) 2. TP-LINK TL-WR841 with dd wrt installed and connect WAN port to router 1's LAN1 port, assigned static ip (192.168.1.4), with its own network (DHCP enabled 192.168.2.1).

23.04.2013 · Michael at Notionwork shows you how to setup DNSMasq on a DD-WRT router and correctly configure it so that it may be used for local DNS resolution.Namebench ...

May 25, 2011 · Apply the settings to DD-WRT, and you should be all set. This is an example of what your DNSMasq settings may look like: If your devices don’t see the changes after they’ve been made you may need to try restarting them since that is often the simplest way to clear the DNS cache.

12.03.2018 · DNSmasq as local DNS. 1. No name router from my internet provider with internet cable in it, default firmware. (DHCP enabled 192.168.1.1) 2. TP-LINK TL-WR841 with dd wrt installed and connect WAN port to router 1's LAN1 port, assigned static ip (192.168.1.4), with its own network (DHCP enabled 192.168.2.1).

Mar 26, 2013 · Open a browser and point it to your router running DD-WRT. Authenticate with the admin ID and password when needed. Go to the “Setup > Basic Setup” tab. In the “Network Setup > Router IP” section, enter the following details: Local DNS = 0.0.0.0. In the “Setup > Basic” tab, in the “Network Address Server Settings (DHCP)” section ...